The Jackalope Transport Trailer is a light weight, yet durable transport which will carry an ATV and Jackalope Conversion Unit or two ATV’s, which ever fits your needs.

        The transport’s tandem axle makes this unit very stable for loading and helps prevent vertical pitching action on the hitch while traveling on gravel roads or rougher terrains. It also tracks well on interstates at highway speeds.

         Unlike larger trailers, the designed six foot width allows you to store a fully loaded Jackalope Conversion Unit left attached to the ATV in a smaller area, making the complete unit available for a quick response. The light weight slide out ramps which are stored under the trailer, can be quickly attached to the back of the transport and the complete unit can be easily backed off upon arrival at your destination. 

        The unloaded transport is balanced in such a way a single adult can pick up the hitch and swing the trailer in a 360 degree circle. This is a very desirable feature at a dead end road or trail with no room to turn the complete unit around.

        The open framework on the chassis and ramps does not allow mud or water to accumulate on the trailer, which makes cleaning of the ATV and Jackalope Conversion Unit fast and simple. The Jackalope Transport can be converted into a utility or snowmobile trailer by installing a 3/4 inch exterior plywood floor to the center beam framework.

        The wheels and hubs are interchangeable on both the Jackalope Conversion Unit and Transport Trailer so if a flat tire should occur on one unit, a simple wheel change can be made to get you to your destination.

All Rights Reserved © 2004 Jackalope Conversions
This web site was developed and maintained by Orness Creations
Send web site tech issues to webmaster